UC Laboratory
Homeowner samples · Mail-in kits
- Coliform Bacteria
- Iron and Manganese
- Nitrate / Nitrite
Minnesota Valley Testing Laboratories, Inc. is a commercial laboratory in New Ulm, MN (Brown County). It is on the Minnesota drinking water program's list of certified laboratories (certificate MN00008), and we last checked the list on September 29, 2026.
The lab takes samples from homeowners and ships mail-in sample kits.
Before you go: MDH accredited (Safe Drinking Water Program, drinking water matrix), accepts samples from private homeowners. Accreditation expires 12/31/2026. Accredited for: Turbidity, Bromide, Chloride, Fluoride, Nitrate as N, Nitrite as N, Sulfate, Cyanide, Nitrate plus Nitrite as N, Alkalinity as CaCO3, Hardness, Conductivity, Residue-filterable (TDS), Total chlorine, pH, Surfactants - MBAS, Aluminum, Barium, Calcium, Chromium, Copper, Iron, Magnesium, Manganese, Nickel, Silica as SiO2, Silver, Sodium, Zinc, Antimony, Arsenic, Beryllium, Cadmium, Lead, Mercury, Selenium, Thallium, Heterotrophic plate count, Total coliforms, Escherichia coli (E. coli).
This profile is built from the official state list of certified drinking water laboratories, checked on September 29, 2026. Well Water Insider does not rate or endorse labs. Run this lab? Claim the profile to add prices, turnaround times, hours and a description.
Listed on the official state certified laboratory list.
How this lab takes samples, based on its listing. Call to confirm hours, bottles and prices.
Published lab fees in Minnesota: $50 for a bacteria test, and nitrate screening is often free (Fillmore SWCD water lab, Minnesota Department of Agriculture: nitrate testing). Prices at this lab may differ.
Bacteria samples need a sterile bottle from the lab. Chemistry samples usually take a clean container the lab supplies.
Skip softeners and filters. Remove the aerator, run the water 3 to 5 minutes, then fill without touching the inside of the cap.
Bacteria samples are time-sensitive. Use a cooler with ice packs and hand it in or ship it the same day.
Compare results with EPA drinking water limits. If anything is over, our problem pages explain what it means and how to treat it.
From the state certification list and the lab's own listing. Ask which ones it runs for homeowners.
Natural in some bedrock, with no taste or smell. The EPA limit is 0.010 mg/L. Learn more
Total coliform and E. coli. The test the CDC recommends every year for every private well. Learn more
A broad package that usually covers bacteria, nitrate, metals and minerals. Learn more
Calcium and magnesium. You need this number to size a water softener. Learn more
The cause of orange and black stains. EPA guidelines are 0.3 and 0.05 mg/L. Learn more
Usually from plumbing and older well parts. EPA says there is no safe level. Learn more
From fertilizer, manure and septic systems. The EPA limit is 10 mg/L as nitrogen. Learn more
1126 N Front St, New Ulm, MN 56073
Lab address
Yes. It is on the Minnesota list of laboratories certified for drinking water testing, last checked September 29, 2026.
Its listing covers arsenic, coliform bacteria, full homeowner panel, hardness, iron and manganese, lead and nitrate / nitrite. Call to confirm prices and which tests it runs for private well owners.
Yes, the listing says it takes homeowner samples and ships mail-in kits. Get the right bottle from the lab first, especially for bacteria.
Call (507) 354-8517 and visit the lab's website. The address is 1126 N Front St, New Ulm, MN 56073.
Homeowner samples · Mail-in kits
Homeowner samples · Mail-in kits