Montana county well guide

Well Water in Custer County, MT: Testing, Contractors and Rules

About 2,500 people in Custer County, 21% of residents, get their water from a private well. Nobody tests that water unless the owner does.

21%of residents on a private well
Share on private wells
Custer County21%
Montana29%
5licensed contractors serve the county
136 mito the nearest certified lab that takes homeowner samples, Energy Laboratories – Billings
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010, and state well records. Labs and contractors: state certification and license lists.

About 2,500 people in Custer County, 21% of residents, rely on a private well, according to a 2010 U.S. Geological Survey estimate. That is below the Montana figure of 29%. State well records list 597 household wells in the Montana Ground Water Information Center (GWIC) drilled since 1990, with a median depth of 280 feet. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Custer County

Private wells in Custer County follow Montana's statewide rules, administered by the Montana Board of Water Well Contractors. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.

At a glance

Water test for a new wellNot required statewide

No state water test. A home well needs a water right filing with DNRC (Form 602I Notice of Intent, $400, then Form 602) and a driller licensed by the Board of Water Well Contractors, who files the well log with GWIC within 60 days. Some counties, such as Missoula, issue their own well permits.

Water test when a home is soldNot required statewide

No state requirement. Buyers often ask for a bacteria and nitrate test, and some lenders require one. The State Environmental Laboratory runs a HUD/FHA test for $90.

What the state recommends

Every year: coliform bacteria and nitrate, ideally in spring. First test: a full panel with arsenic, uranium, manganese, fluoride, selenium, lead, copper, hardness and total dissolved solids (MSU Extension). See the full list by region below.

Free or low-cost testingAvailable

No free statewide program. MSU Well Educated runs reduced cost testing through county Extension offices (for example, a full panel for $125 in Park County), and the State Environmental Laboratory tests bacteria for $25.

Getting your water tested near Custer County

No state-certified lab sits within 40 miles of Custer County, which is common in rural Montana. To give you options anyway, the list below shows the 6 closest certified labs, 125 to 245 miles away, with the distance on each one. The nearest that takes samples from homeowners is Energy Laboratories – Billings in Billings, about 136 miles away. At that distance a mail-in kit is the practical route: the lab ships bottles, you sample at the cold kitchen tap and send them back the same day with an ice pack.

Licensed well contractors serving Custer County

5 licensed contractors list Custer County as a home base or service area, including Hansen Environmental Drilling Inc and Higgins Drilling Co. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

In state well records, the median household well in Custer County is 280 feet deep, and the middle half run 190 to 420 feet (597 household wells in the Montana Ground Water Information Center (GWIC) drilled since 1990). Contaminants worth testing for in this part of Montana include coliform bacteria, arsenic, manganese, and uranium. A first full panel tells you which of them apply to your well.

Typical well depth
Median well280 ft
Most wells190 to 420 ft
Based on597 wells

Household wells in the Montana Ground Water Information Center (GWIC) drilled since 1990. "Most wells" is the middle half.

Contaminants to test for
  • Coliform bacteriaAbout 1 in 4 well samples
  • ArsenicNaturally occurring
  • ManganeseNaturally occurring
  • UraniumNaturally occurring
  • NitrateSeptic systems and farming
  • Fluoride
  • Selenium
  • Iron and iron bacteria
  • Sulfate and total dissolved solidsEastern plains

Neighboring counties: Prairie County, Rosebud County, Powder River County, Dawson County.

Typical well costs: national price ranges

Bacteria test (coliform and E. coli)$10 to $60state, county and university lab fees
Nitrate test$10 to $80varies by lab; ask when you order
Broad panel (metals and minerals)$85 to $450state and university lab packages
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: HomeGuide cost guides, Angi: cost to shock a well.

Questions Custer County well owners ask

How many people in Custer County use a private well?

The U.S. Geological Survey estimates about 2,500 people, 21% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data. State well records add a second view: 597 household wells in the Montana Ground Water Information Center (GWIC) drilled since 1990.

Where is the closest certified lab to Custer County?

Energy Laboratories – Billings in Billings, about 136 miles from the county's population center. It says it accepts samples from homeowners. Nothing is closer than 40 miles, so ask about mail-in kits.

Do I need a permit to drill a well in Custer County?

No state water test. A home well needs a water right filing with DNRC (Form 602I Notice of Intent, $400, then Form 602) and a driller licensed by the Board of Water Well Contractors, who files the well log with GWIC within 60 days. Some counties, such as Missoula, issue their own well permits.

What does a well test cost near Custer County?

Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Mail-in kits cost about the same as walking in.