Energy Laboratories – WY
- Certification
- State certified list checked September 29, 2026
- Certified in
- 2 states CO and MT
- Tests listed
- 9 Arsenic and more
- Homeowner samples
- Yes Mail-in
About Energy Laboratories – WY
Energy Laboratories – WY is a commercial laboratory in Casper, WY (Natrona County). It is on the Colorado and Montana drinking water programs' list of certified laboratories, and we last checked the list on September 29, 2026.
The lab takes samples from homeowners and ships mail-in sample kits.
Before you go: Certified by the Montana DPHHS Laboratory Certification Program to test drinking water (inorganic and organic chemistry). Call before sending a private well sample to confirm prices, bottles and shipping.
Certified by the Colorado Department of Public Health and Environment (certification WY00002). Listed by CDPHE as accepting outside samples. Certified analytes: Total Organic Carbon, Heterotrophic Plate Count (Simplate), Radium-228, Radium-226, Carbofuran, Diquat, Gross Alpha, Glyphosate, Nitrate-N, Fluoride, Gross Beta, Nitrite-N, Oxamyl (Vydate), Total Coliform & E. coli MPN, Uranium, Total Coliform & E. coli P/A.
This profile is built from the official state list of certified drinking water laboratories, checked on September 29, 2026. Well Water Insider does not rate or endorse labs. Run this lab? Claim the profile to add prices, turnaround times, hours and a description.
Certification and services
State certified- Certified by
- Colorado and Montana drinking water programs
- Lab type
- Commercial
- Last verified
- September 29, 2026
Certifications
- Colorado: No. WY00002 · micro, chem, radiological · checked Sep 29, 2026 source
- Montana: Drinking water: inorganic and organic chemistry · checked Oct 8, 2026 source
Listed on the official state certified laboratory list.
How to test your water here
How this lab takes samples, based on its listing. Call to confirm hours, bottles and prices.
Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Prices at this lab may differ.
- 1
Call for the right bottles
Bacteria samples need a sterile bottle from the lab. Chemistry samples usually take a clean container the lab supplies.
- 2
Collect from a cold tap before treatment
Skip softeners and filters. Remove the aerator, run the water 3 to 5 minutes, then fill without touching the inside of the cap.
- 3
Keep it cold and deliver within 24 hours
Bacteria samples are time-sensitive. Use a cooler with ice packs and hand it in or ship it the same day.
- 4
Read the report against the standards
Compare results with EPA drinking water limits. If anything is over, our problem pages explain what it means and how to treat it.
Tests this lab is listed for
From the state certification list and the lab's own listing. Ask which ones it runs for homeowners.
Arsenic
Natural in some bedrock, with no taste or smell. The EPA limit is 0.010 mg/L. Learn more
Coliform Bacteria
Total coliform and E. coli. The test the CDC recommends every year for every private well. Learn more
Hardness
Calcium and magnesium. You need this number to size a water softener. Learn more
Iron and Manganese
The cause of orange and black stains. EPA guidelines are 0.3 and 0.05 mg/L. Learn more
Lead
Usually from plumbing and older well parts. EPA says there is no safe level. Learn more
Nitrate / Nitrite
From fertilizer, manure and septic systems. The EPA limit is 10 mg/L as nitrogen. Learn more
Pesticides
Farm and lawn chemicals that can reach shallow wells.
Uranium
Natural in granite and some other rock. The EPA limit is 0.030 mg/L. Learn more
Volatile Organic Compounds
Fuel and solvent chemicals from spills and leaking tanks. Learn more
Location
2393 Salt Creek Highway, Casper, WY 82601
Lab address
Questions about Energy Laboratories – WY
Is Energy Laboratories – WY state certified?
Yes. It is on the Colorado and Montana list of laboratories certified for drinking water testing, last checked September 29, 2026.
What can Energy Laboratories – WY test well water for?
Its listing covers arsenic, coliform bacteria, hardness, iron and manganese, lead, nitrate / nitrite, pesticides, uranium and volatile organic compounds. Call to confirm prices and which tests it runs for private well owners.
Can I bring my own well water sample?
Yes, the listing says it takes homeowner samples and ships mail-in kits. Get the right bottle from the lab first, especially for bacteria.
How do I contact Energy Laboratories – WY?
Call (307) 235-0515 and visit the lab's website. The address is 2393 Salt Creek Highway, Casper, WY 82601.

