State-certified labTakes homeowner samples

Energy Laboratories – Billings

Billings, MT · Yellowstone CountyCommercial laboratory

Certification
State certified
list checked October 8, 2026
Certified in
2 states
MT and CO
Tests listed
12
Arsenic and more
Homeowner samples
Yes
Drop-off

About Energy Laboratories – Billings

Energy Laboratories – Billings is a commercial laboratory in Billings, MT (Yellowstone County). It is on the Montana and Colorado drinking water programs' list of certified laboratories, and we last checked the list on October 8, 2026.

The lab takes samples from homeowners.

Before you go: Energy Laboratories is a large regional commercial lab certified by DPHHS for microbiology and both inorganic and organic chemistry, so it can run nearly any drinking water test a well owner needs, including iron and sulfur bacteria.

Certified by the Colorado Department of Public Health and Environment (certification MT00005). Listed by CDPHE as accepting outside samples. Certified analytes: Nitrate-N, Methoxychlor, Hexachlorocyclopentadiene, N-ethyl perfluorooctanesulfonamidoacetic acid, Dichloroacetic Acid, Dibromoacetic Acid, Dalapon, Copper, Chromium, Chlorodibromomethane, Chloroform, Chlorobenzene, Chloroacetic Acid, Total Cyanide, Total Xylenes, Amenable Cyanide (CATC), Carbon tetrachloride, Vinyl Chloride, Beryllium, Benzene, Barium, Arsenic, Aroclors, Antimony, 2,4,5-TP, 2,4-D, 1,4-Dichlorobenzene, 1,2,4-Trichlorobenzene, 1,2-Dichloropropane, 1,2-Dichloroethane, 1,2-Dichlorobenzene, 1,1,2-Trichloroethane, Dibromochloropropane, 1,1,1-Trichloroethane, 1,1-Dichloroethylene, Fluoride, Trichloroethylene, Lead, Lindane (gamma-BHC), Mercury, Nickel, Bis-(2-ethylhexyl) Adipate, Nitrite-N, Bis-(2-ethylhexyl) Phthalate, Benzo(a)pyrene, Dinoseb, Endothall, Bromide, Pentachlorophenol, Bromoform, Bromodichloromethane, Bromoacetic Acid, 11-Chloroeicosafluoro-3-oxaundecane-1-sulfonic acid, Picloram, Simazine, Styrene, Tetrachloroethylene, Alachlor, Thallium, 4,8-Dioxa-3H-perfluorononanoic acid, Hexafluoropropylene oxide dimer acid, Perfluorobutanesulfonic acid, Perfluorodecanoic acid, Perfluorododecanoic acid, Toluene, Perfluoroheptanoic acid, Perfluorohexanoic acid, 9-Chlorohexadecafluoro-3-oxanonane-1-sulfonic acid, Perfluorooctanesulfonic acid, Perfluorooctanoic acid, Cadmium, Perfluorononanoic acid, Perfluorohexanesulfonic acid, Perfluoroundecanoic acid, Chlordane, Uranium, N-methyl perfluorooctanesulfonamidoacetic acid, Dichloromethane, Perfluorotetradecanoic acid,.

This profile is built from the official state list of certified drinking water laboratories, checked on October 8, 2026. Well Water Insider does not rate or endorse labs. Run this lab? Claim the profile to add prices, turnaround times, hours and a description.

Certification and services

Certified by
Montana and Colorado drinking water programs
Lab type
Commercial
Pricing
Prices are not posted online; call the lab for homeowner well test pricing and bottles.
Last verified
October 8, 2026

Certifications

  • Montana: Drinking water: microbiology, inorganic and organic chemistry · checked Oct 8, 2026 source
  • Colorado: No. MT00005 · chem · checked Sep 29, 2026 source

Listed on the official state certified laboratory list.

How to test your water here

How this lab takes samples, based on its listing. Call to confirm hours, bottles and prices.

Homeowner samplesYou can collect and drop off your own sample
Mail-in kitsNot listed, call to confirm
Walk-in drop offNot listed, call to confirm
PricesPrices are not posted online; call the lab for homeowner well test pricing and bottles.

Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Prices at this lab may differ.

  1. 1

    Call for the right bottles

    Bacteria samples need a sterile bottle from the lab. Chemistry samples usually take a clean container the lab supplies.

  2. 2

    Collect from a cold tap before treatment

    Skip softeners and filters. Remove the aerator, run the water 3 to 5 minutes, then fill without touching the inside of the cap.

  3. 3

    Keep it cold and deliver within 24 hours

    Bacteria samples are time-sensitive. Use a cooler with ice packs and hand it in or ship it the same day.

  4. 4

    Read the report against the standards

    Compare results with EPA drinking water limits. If anything is over, our problem pages explain what it means and how to treat it.

Tests this lab is listed for

From the state certification list and the lab's own listing. Ask which ones it runs for homeowners.

Arsenic

Natural in some bedrock, with no taste or smell. The EPA limit is 0.010 mg/L. Learn more

Coliform Bacteria

Total coliform and E. coli. The test the CDC recommends every year for every private well. Learn more

Full Homeowner Panel

A broad package that usually covers bacteria, nitrate, metals and minerals. Learn more

Hardness

Calcium and magnesium. You need this number to size a water softener. Learn more

Iron and Manganese

The cause of orange and black stains. EPA guidelines are 0.3 and 0.05 mg/L. Learn more

Lead

Usually from plumbing and older well parts. EPA says there is no safe level. Learn more

Nitrate / Nitrite

From fertilizer, manure and septic systems. The EPA limit is 10 mg/L as nitrogen. Learn more

Pesticides

Farm and lawn chemicals that can reach shallow wells.

PFAS

Forever chemicals. EPA set limits of 4 parts per trillion for PFOA and PFOS. Learn more

Radon in Water

A gas from granite areas that escapes into the air when you use water. Learn more

Uranium

Natural in granite and some other rock. The EPA limit is 0.030 mg/L. Learn more

Volatile Organic Compounds

Fuel and solvent chemicals from spills and leaking tanks. Learn more

Location

1120 South 27th Street, Billings, MT 59101

Lab address

Questions about Energy Laboratories – Billings

Is Energy Laboratories – Billings state certified?

Yes. It is on the Montana and Colorado list of laboratories certified for drinking water testing, last checked October 8, 2026.

What can Energy Laboratories – Billings test well water for?

Its listing covers arsenic, coliform bacteria, full homeowner panel, hardness, iron and manganese, lead, nitrate / nitrite, pesticides, pfas, radon in water, uranium and volatile organic compounds. Call to confirm prices and which tests it runs for private well owners.

Can I bring my own well water sample?

Yes, the listing says it takes homeowner samples. Get the right bottle from the lab first, especially for bacteria.

How do I contact Energy Laboratories – Billings?

Call (406) 252-6325 and visit the lab's website. The address is 1120 South 27th Street, Billings, MT 59101.