State-certified labTakes homeowner samples

RMB Environmental Laboratories, Inc – Burnsville

Burnsville, MN · Dakota CountyCommercial laboratory

Certification
State certified
list checked September 29, 2026
Certificate
MN01091
Minnesota program
Tests listed
8
Arsenic and more
Homeowner samples
Yes
Mail-in

About RMB Environmental Laboratories, Inc – Burnsville

RMB Environmental Laboratories, Inc – Burnsville is a commercial laboratory in Burnsville, MN (Dakota County). It is on the Minnesota drinking water program's list of certified laboratories (certificate MN01091), and we last checked the list on September 29, 2026.

The lab takes samples from homeowners and ships mail-in sample kits.

Before you go: MDH accredited (Safe Drinking Water Program, drinking water matrix), accepts samples from private homeowners. Accreditation expires 12/31/2026. Accredited for: Turbidity, Nitrite as N, Color, Hardness, Conductivity, Temperature, deg. C, Free chlorine, Total residual chlorine, Chloride, pH, Orthophosphate as P, Dissolved organic carbon (DOC), Total Organic Carbon (TOC), Nitrate as N, Nitrate plus Nitrite as N, Aluminum, Barium, Beryllium, Cadmium, Calcium, Chromium, Copper, Iron, Magnesium, Manganese, Nickel, Silica as SiO2, Silver, Sodium, Zinc, Antimony, Arsenic, Lead, Selenium, Thallium, Uranium (mass), Heterotrophic plate count, Escherichia coli (E. coli), Total coliforms.

This profile is built from the official state list of certified drinking water laboratories, checked on September 29, 2026. Well Water Insider does not rate or endorse labs. Run this lab? Claim the profile to add prices, turnaround times, hours and a description.

Certification and services

State certified
Certification number
MN01091
Certified by
Minnesota drinking water program
Certified for
Microbiological, Chemical
Lab type
Commercial
Last verified
September 29, 2026

Listed on the official state certified laboratory list.

How to test your water here

How this lab takes samples, based on its listing. Call to confirm hours, bottles and prices.

Homeowner samplesYou can collect and drop off your own sample
Mail-in kitsBottles shipped to you, sample shipped back
Walk-in drop offNot listed, call to confirm

Published lab fees in Minnesota: $50 for a bacteria test, and nitrate screening is often free (Fillmore SWCD water lab, Minnesota Department of Agriculture: nitrate testing). Prices at this lab may differ.

  1. 1

    Call for the right bottles

    Bacteria samples need a sterile bottle from the lab. Chemistry samples usually take a clean container the lab supplies.

  2. 2

    Collect from a cold tap before treatment

    Skip softeners and filters. Remove the aerator, run the water 3 to 5 minutes, then fill without touching the inside of the cap.

  3. 3

    Keep it cold and deliver within 24 hours

    Bacteria samples are time-sensitive. Use a cooler with ice packs and hand it in or ship it the same day.

  4. 4

    Read the report against the standards

    Compare results with EPA drinking water limits. If anything is over, our problem pages explain what it means and how to treat it.

Tests this lab is listed for

From the state certification list and the lab's own listing. Ask which ones it runs for homeowners.

Arsenic

Natural in some bedrock, with no taste or smell. The EPA limit is 0.010 mg/L. Learn more

Coliform Bacteria

Total coliform and E. coli. The test the CDC recommends every year for every private well. Learn more

Full Homeowner Panel

A broad package that usually covers bacteria, nitrate, metals and minerals. Learn more

Hardness

Calcium and magnesium. You need this number to size a water softener. Learn more

Iron and Manganese

The cause of orange and black stains. EPA guidelines are 0.3 and 0.05 mg/L. Learn more

Lead

Usually from plumbing and older well parts. EPA says there is no safe level. Learn more

Nitrate / Nitrite

From fertilizer, manure and septic systems. The EPA limit is 10 mg/L as nitrogen. Learn more

Uranium

Natural in granite and some other rock. The EPA limit is 0.030 mg/L. Learn more

Location

501 Highway 13 East, Burnsville, MN 55337

Lab address

Questions about RMB Environmental Laboratories, Inc – Burnsville

Is RMB Environmental Laboratories, Inc – Burnsville state certified?

Yes. It is on the Minnesota list of laboratories certified for drinking water testing, last checked September 29, 2026.

What can RMB Environmental Laboratories, Inc – Burnsville test well water for?

Its listing covers arsenic, coliform bacteria, full homeowner panel, hardness, iron and manganese, lead, nitrate / nitrite and uranium. Call to confirm prices and which tests it runs for private well owners.

Can I bring my own well water sample?

Yes, the listing says it takes homeowner samples and ships mail-in kits. Get the right bottle from the lab first, especially for bacteria.

How do I contact RMB Environmental Laboratories, Inc – Burnsville?

Call (952) 456-8470 and visit the lab's website. The address is 501 Highway 13 East, Burnsville, MN 55337.

Other certified labs nearby