Private well guide

Well Water in North Carolina: Testing, Rules, Labs and Licensed Contractors

About 2,164,000 people in North Carolina get their water from a private well, by the U.S. Geological Survey's estimate. Here is what the state requires, where to get it tested, and who is licensed to work on it.

607Licensed contractorschecked against state records
90Certified labsfrom the state certified list
100Counties covered
2,164,000People on private wells23% of residents (USGS, 2010)

The short version: About 2.2 million North Carolinians, 23% of residents, drink from a private well (USGS estimate, 2010). For them, the path runs through the county health department. They permit the well, they take the first sample within 30 days of completion, and for many families they are the cheapest place to get water tested. After that, testing is up to you.

North Carolina at a glance
Permit to drill a home well Yes, from your county health department
Who can drill it A certified well contractor. It’s illegal to construct, repair or abandon a well without one
Water test for a new well Required within 30 days of completion, before the water is used for drinking
Water test when a home sells Not required by the state (some lenders require one)
Most common problem Manganese, over the state standard in about 28% of well samples in 2018 and 2019
Typical household well depth Depth varies widely across the state. Logs of nearby wells are the best guide
Where to test Your county environmental health office (fees vary by county), or a state certified lab

Who is in charge of a North Carolina well

Your county does the hands-on work, backed by several state offices:

Agency What it handles
County health department, Environmental Health Permits new wells, samples every new well, and collects samples from existing wells for the state lab. Fees and procedures vary by county
Well Contractors Certification Commission (DHHS Division of Public Health) Certifies well contractors and keeps the searchable list of certified contractors
State Laboratory of Public Health Tests the samples counties send in, and certifies commercial labs
DHHS Occupational and Environmental Epidemiology Publishes the private well testing schedule and the well water contaminant maps
DEQ Division of Water Resources and the NC Geological Survey Map groundwater quality and the rock units that carry natural contaminants like arsenic, radon and manganese

Once the first test is done, the water is your responsibility.

What is required, and what is left to you

North Carolina regulates both the well and its first water test. Every new well needs:

  • A county permit. Your county health department issues it before drilling starts.
  • A certified contractor. It is illegal to construct, repair or abandon a well without one.
  • A test within 30 days. Every new private well must be tested within 30 days of completion, before it is used for drinking, by the State Laboratory of Public Health or a certified lab. Local health departments have sampled every new well since 2008.

After that, it is up to the owner. Here’s where the state stands:

At a glance

Water test for a new wellRequired

Every newly constructed private well must be tested within 30 days of completion by the State Laboratory of Public Health or a certified lab before it is used for drinking water.

Water test when a home is soldNot required statewide

No statewide requirement at sale. Some lenders require a test.

What the state recommends

Every year: total and fecal coliform bacteria plus a wellhead inspection. Every 2 years: heavy metals, nitrate and nitrite, lead and copper. Every 5 years: pesticides and volatile organic compounds. Retest after repairs, flooding, a change in water quality, or when an infant or pregnant person is in the home.

Free or low-cost testingAvailable

County health departments collect samples and send them to the State Laboratory of Public Health at set fees that vary by county.

What the water is like in each part of North Carolina

What’s in your well depends on the rock and the land use around it. Here’s the broad picture.

Region Typical household well What to expect
Mountains and western counties Bedrock Arsenic and radon are the results to watch. Radon levels follow the rock type.
Piedmont Bedrock Low pH water from the granite aquifers dissolves copper and lead from plumbing, which leaves blue-green stains.
Central Piedmont volcanic rock Bedrock The most wells with detectable and elevated arsenic in the state. Anson, Montgomery, Stanly and Union are among the counties with more arsenic detections.
Coastal plain Shallower, but needs more casing Dare County is on the state’s list of counties with more arsenic. Near seawater, salty-tasting water calls for a chloride, sodium and total dissolved solids test.

Naturally occurring arsenic turns up in groundwater all over the state, from 1 to 800 ppb. Depth drives the price of a new well, and it varies widely across the state. Logs of nearby wells are the best guide, and our well record finder links to them.

What to test for

This follows the DHHS testing schedule, with the situational tests NC State Extension recommends.

Test How often Who needs it
Total and fecal coliform bacteria, plus a wellhead inspection for cracks or openings Every year Every well
Heavy metals including arsenic, plus nitrate and nitrite, lead and copper Every 2 years Every well
Pesticides and volatile organic compounds Every 5 years, or yearly for a pesticide used near you Every well
Nitrate Early in pregnancy and just after the birth Homes expecting a baby. Don’t use water with nitrate for formula, and don’t boil it, since boiling won’t remove it
Chloride, sodium, barium and strontium With your next test Wells near gas drilling
Petroleum and volatile organic compounds Right away Wells near an old underground tank, or water that smells like gasoline
Retest After repairs, flooding, or a change in taste, color or odor Every well

Why manganese and pH get top billing: when health departments tested more than 10,000 well samples in 2018 and 2019, about 28% were over the manganese standard, 17% over the iron standard and 12% outside the healthy pH range. Arsenic was over the limit in about 2% and lead in about 1%, which is small but serious when it’s your well. If a result comes back high, our arsenic guide, treatment planner and shock chlorination calculator walk you through the next step.

Certified labs and county sampling

You have two ways to get tested in North Carolina:

Option Best for Cost
County environmental health office The new well test and routine panels, run by the State Laboratory of Public Health Varies by county
State certified commercial lab A full metals panel, or a mortgage test on a deadline Varies by lab

County environmental health offices collect samples and send them to the state lab. Most will send a sampler to your home or hand you bottles with instructions. Ask how long results take. The commercial labs below are certified by the state and accept homeowner samples, which is faster when you’re on a deadline. Lead and low pH are the results to watch in the Piedmont, arsenic and radon in the western counties.

See all 90 certified labs in North Carolina

Certified well contractors

Three things to know before you hire in North Carolina:

  • Certification is the law. North Carolina certifies well contractors through the Well Contractors Certification Commission, and it is illegal to construct, repair or abandon a well without one.
  • Check the person. Certification belongs to individuals, so ask for the certification number and look it up in the state’s certified contractor search.
  • Quotes come by the foot. Depth drives the price. Expect a per-foot quote, plus the pump, pressure tank and the county permit.

Each profile below carries the certification numbers of the certified individuals at that business and the date we matched them to the state list.

See all 607 licensed contractors in North Carolina

By county

The share of residents on a well swings widely from county to county:

  • Very few: Pasquotank (3%), Mecklenburg (4%), Wake (7%) and Durham (10%) counties
  • About a quarter to a third: Alamance (23%), Henderson (24%), Catawba (29%), Johnston (30%) and Randolph (36%) counties
  • The highest shares: Caswell (81%), Sampson (73%), Camden (72%), Warren (71%) and Columbus (69%) counties

Wake County has the most well users, about 61,500 people, even though that is only 7% of its residents. Fees, sampling schedules and the local geology differ by county too, so open yours for the details.

North Carolina well water questions

How do I get my well tested through the county?

Call your county environmental health office. Most will send a sampler to your home or hand you bottles with instructions, then submit the sample to the State Laboratory of Public Health. Ask how long results will take.

Is a well test required when selling a house in North Carolina?

Not by the state. Some lenders require one, and buyers increasingly ask for a bacteria, nitrate and metals panel as part of the inspection.

My water is blue-green staining the tub. Is that a well problem?

It is usually low pH water dissolving copper from your own pipes, which is common in the Piedmont’s granite aquifers. A pH test confirms it and a neutralizing filter fixes it. Test for lead too, since the same water pulls lead from older solder and fixtures.

What does a new well cost in North Carolina?

Depth drives the price, and it varies widely across the state. Logs of nearby wells are the best guide. Expect quotes by the foot, plus the pump, pressure tank and the county permit.

How often should I test my well in North Carolina?

Every year for coliform bacteria, with a look at the wellhead. Every 2 years for heavy metals, nitrate and nitrite, lead and copper, and every 5 years for pesticides and volatile organic compounds. Retest after any repair, flood or change in the water.