State-certified labTakes homeowner samples

Energy Laboratories – Helena

Helena, MT · Lewis and Clark CountyCommercial laboratory

Certification
State certified
list checked October 8, 2026
Certified in
2 states
MT and CO
Tests listed
10
Arsenic and more
Homeowner samples
Yes
Drop-off

About Energy Laboratories – Helena

Energy Laboratories – Helena is a commercial laboratory in Helena, MT (Lewis and Clark County). It is on the Montana and Colorado drinking water programs' list of certified laboratories, and we last checked the list on October 8, 2026.

The lab takes samples from homeowners.

Before you go: The Helena branch of Energy Laboratories holds DPHHS certification for microbiology and inorganic and organic chemistry, and also tests for iron and sulfur reducing bacteria.

Certified by the Colorado Department of Public Health and Environment (certification MT00945). Listed by CDPHE as accepting outside samples. Certified analytes: 1,2,4-Trichlorobenzene, 1,2-Dichloroethane, 1,2-Dichlorobenzene, Chloroform, Chlorobenzene, Total Xylenes, Tetrachloroethylene, Styrene, Carbon tetrachloride, Benzene, 1,4-Dichlorobenzene, 1,2-Dichloropropane, 1,1-Dichloroethylene, 1,1,1-Trichloroethane, Chlorodibromomethane, Bromodichloromethane, 1,1,2-Trichloroethane, c-1,2-Dichloroethylene, Bromoform, t-1,2-Dichloroethylene, Vinyl Chloride, Trichloroethylene, Toluene, Ethylbenzene, Dichloromethane.

This profile is built from the official state list of certified drinking water laboratories, checked on October 8, 2026. Well Water Insider does not rate or endorse labs. Run this lab? Claim the profile to add prices, turnaround times, hours and a description.

Certification and services

Certified by
Montana and Colorado drinking water programs
Lab type
Commercial
Pricing
Prices are not posted online; call the lab for homeowner well test pricing and bottles.
Last verified
October 8, 2026

Certifications

  • Montana: Drinking water: microbiology, inorganic and organic chemistry · checked Oct 8, 2026 source
  • Colorado: No. MT00945 · chem · checked Sep 29, 2026 source

Listed on the official state certified laboratory list.

How to test your water here

How this lab takes samples, based on its listing. Call to confirm hours, bottles and prices.

Homeowner samplesYou can collect and drop off your own sample
Mail-in kitsNot listed, call to confirm
Walk-in drop offNot listed, call to confirm
PricesPrices are not posted online; call the lab for homeowner well test pricing and bottles.

Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Prices at this lab may differ.

  1. 1

    Call for the right bottles

    Bacteria samples need a sterile bottle from the lab. Chemistry samples usually take a clean container the lab supplies.

  2. 2

    Collect from a cold tap before treatment

    Skip softeners and filters. Remove the aerator, run the water 3 to 5 minutes, then fill without touching the inside of the cap.

  3. 3

    Keep it cold and deliver within 24 hours

    Bacteria samples are time-sensitive. Use a cooler with ice packs and hand it in or ship it the same day.

  4. 4

    Read the report against the standards

    Compare results with EPA drinking water limits. If anything is over, our problem pages explain what it means and how to treat it.

Tests this lab is listed for

From the state certification list and the lab's own listing. Ask which ones it runs for homeowners.

Arsenic

Natural in some bedrock, with no taste or smell. The EPA limit is 0.010 mg/L. Learn more

Coliform Bacteria

Total coliform and E. coli. The test the CDC recommends every year for every private well. Learn more

Full Homeowner Panel

A broad package that usually covers bacteria, nitrate, metals and minerals. Learn more

Hardness

Calcium and magnesium. You need this number to size a water softener. Learn more

Iron and Manganese

The cause of orange and black stains. EPA guidelines are 0.3 and 0.05 mg/L. Learn more

Lead

Usually from plumbing and older well parts. EPA says there is no safe level. Learn more

Nitrate / Nitrite

From fertilizer, manure and septic systems. The EPA limit is 10 mg/L as nitrogen. Learn more

Pesticides

Farm and lawn chemicals that can reach shallow wells.

Uranium

Natural in granite and some other rock. The EPA limit is 0.030 mg/L. Learn more

Volatile Organic Compounds

Fuel and solvent chemicals from spills and leaking tanks. Learn more

Location

3161 East Lyndale Avenue, Helena, MT 59601

Lab address

Questions about Energy Laboratories – Helena

Is Energy Laboratories – Helena state certified?

Yes. It is on the Montana and Colorado list of laboratories certified for drinking water testing, last checked October 8, 2026.

What can Energy Laboratories – Helena test well water for?

Its listing covers arsenic, coliform bacteria, full homeowner panel, hardness, iron and manganese, lead, nitrate / nitrite, pesticides, uranium and volatile organic compounds. Call to confirm prices and which tests it runs for private well owners.

Can I bring my own well water sample?

Yes, the listing says it takes homeowner samples. Get the right bottle from the lab first, especially for bacteria.

How do I contact Energy Laboratories – Helena?

Call (406) 442-0711 and visit the lab's website. The address is 3161 East Lyndale Avenue, Helena, MT 59601.

Other certified labs nearby