Private well guide

Well Water in Georgia: Testing, Rules, Labs and Licensed Contractors

About 1,394,000 people in Georgia get their water from a private well, by the U.S. Geological Survey's estimate. Here is what the state requires, where to get it tested, and who is licensed to work on it.

333Licensed contractorschecked against state records
12Certified labsfrom the state certified list
156Counties covered
1,394,000People on private wells14% of residents (USGS, 2010)

The short version: About 1.4 million Georgians, 14% of residents, drink from a private well (USGS estimate, 2010). Outside metro Atlanta the share climbs past half in county after county. Georgia licenses the people who drill and sets the construction standard, then hands the water back to you. The good news is a well-organized, low-cost testing route: the UGA Extension office in your county.

Georgia at a glance
Permit to drill a home well None from the state. Some counties have their own well rules, so check with yours
Who can drill it A water well contractor licensed through EPD
Water test for a new well Not required statewide. Ask your county whether its well rules call for a bacteria test
Water test when a home sells Not required statewide (some lenders ask for one, and a few county health departments require a well inspection)
Most common failed test Coliform bacteria, everywhere in the state
Typical household well depth Varies widely across the state. Logs of nearby wells are the best guide
Where to test Your county UGA Extension office, or an EPD certified lab

Who is in charge of a Georgia well

The state handles the people who drill. Your county and UGA handle most of the rest:

Agency What it handles
Environmental Protection Division (EPD) and the State Water Well Standards Advisory Council License water well contractors and certify pump contractors under the Water Well Standards Act, and write the construction rules every well must meet. EPD also certifies drinking water labs
County board of health or environmental health office Issues a well permit where the county has one, and gets notice from the contractor before a well is drilled
Department of Public Health (DPH) Publishes the testing advice for private well owners
University of Georgia Extension and its Agricultural and Environmental Services Laboratories Runs the testing program through the Extension office in every county

There is no state permit for an individual home well and no state inspection. Where a permit exists, it’s a county one, and it may come with a bacteria test before the well is used. Call your county environmental health office to find out.

What is required, and what is left to you

Georgia regulates who drills and how the well is built. Every new well needs:

  • A licensed water well contractor. Before drilling, the contractor must notify the county health department.
  • Construction to the state standard. That means grouted casing and setbacks of 10 feet from sewer lines, 50 feet from a septic tank, 100 feet from a drainfield or an animal enclosure, and 150 feet from a cesspool.
  • Disinfection. The contractor must disinfect the new well.
  • A well record. The contractor has to give you one at completion.

Unless your county has its own well ordinance, nobody tests the water when the well is new and nobody tests it when the house is sold. The advice from Public Health and UGA is a bacteria test every year and the UGA basic chemistry test every two or three years. Kits are sold at cost through the county Extension office, so there’s little reason not to. In the Piedmont, ask for radon and uranium as well. Here’s where the state stands:

At a glance

Water test for a new wellNot required statewide

No statewide water test and no state permit for an individual household well. The Water Well Standards Act requires the well to be drilled by a licensed water well contractor to the state construction standards (grouted casing, 10 ft from sewer lines, 50 ft from septic tanks and 100 ft from drainfields), and the contractor must disinfect it and give you a well record. Some counties have their own well rules, which may include a permit and a bacteriological test through the county environmental health office before the well is used, so check with your county.

Water test when a home is soldNot required statewide

No statewide requirement. The seller's disclosure only says whether the property is on a well. Some lenders require a water test before closing, and a few county health departments require a well inspection at transfer.

What the state recommends

The Department of Public Health and UGA Extension recommend testing a private well for coliform bacteria every year and running the UGA basic water test (pH, hardness, nitrate and about 20 metals including iron, manganese, lead, copper and arsenic) every two to three years. Add radon and uranium in the Piedmont and the mountains, sodium and chloride near the coast, and test again after flooding, well work or a change in taste, color or smell.

Free or low-cost testingAvailable

Every county has a UGA Cooperative Extension office that sells the UGA water test kits at cost: the basic chemistry test (W1) is $20 and the bacteria test is $40, with results explained by the county agent. Extension and the county health departments also run periodic free or discounted testing days, and several county environmental health offices test bacteria for a small fee.

What the water is like in each part of Georgia

The fall line splits Georgia’s groundwater in two. Find your side of it below.

Region What to expect
Piedmont and north Georgia mountains Fractured granite and gneiss with modest yields. The water is soft and often acidic enough to corrode copper plumbing, so lead and copper show up at the tap. The granite carries radon and uranium, so both are worth a test in the north metro counties. Iron and manganese staining is the everyday complaint, and PFAS turns up near carpet mills in northwest Georgia.
Coastal Plain (south of the fall line) The Floridan and Claiborne limestones and sands. Harder water, sometimes with a sulfur smell. Arsenic has been found in some South Georgia wells, in and near a geologic structure called the Gulf Trough.
Southwest Georgia Deeper Coastal Plain wells, with nitrate in the farm counties.
The coast and the flatwoods Saltwater is creeping into the Floridan around Brunswick and the coastal islands, so sodium and chloride are worth a test.

Depth varies widely across the state, and Georgia has no statewide well log database. Your well record is the best source for your own well, and logs of nearby wells are the best guide. Try our well record lookup.

One thing is the same everywhere: bacteria is the test most Georgia wells fail.

What to test for

This combines the Department of Public Health schedule with UGA Extension’s household water testing advice.

Test How often Who needs it
Total coliform and E. coli bacteria Every year Every well
Nitrate Every year Every well
Chemistry screen: pH, hardness, iron, manganese, lead, copper and arsenic. DPH recommends UGA’s Private Well Chemical Test (W33C), which includes arsenic and lead Every 3 years Every well
Uranium and radon At least once Piedmont and north Georgia mountain wells
Arsenic At least once Coastal Plain wells below the fall line
Sodium and chloride With the first test Wells near the coast
A fresh test During a pregnancy, or before a baby under 6 months drinks the water Homes with a pregnancy or an infant
Bacteria retest 10 to 14 days after you shock chlorinate Any well that tested positive
Full retest When the well is new or back in service, after flooding, well or pump work, a spill near the well, or a change in taste, color or smell Every well

Why uranium and arsenic get top billing: by late 2011, UGA had tested 581 Georgia well samples for uranium, and 36 of them, about 6%, were over the 30 ppb limit. All 36 came from the Piedmont and Blue Ridge, and one well hit 1,549 ppb, more than 50 times the limit. Of 489 samples tested for arsenic, 17 were over 10 ppb, and 16 of those were from the Coastal Plain. Neither one has a taste or smell. If a result comes back high, our uranium guide, arsenic guide and treatment planner walk you through the fixes.

Certified labs and the UGA Extension test

You have two ways to get tested in Georgia:

Option Best for Cost
UGA test through your county Extension office The yearly bacteria test and the routine chemistry, with the county agent explaining the result $20 for the basic water test, $40 for bacteria and $60 for the expanded test, plus any small county handling fee
EPD certified commercial lab Radon, VOCs, PFAS, or a lender’s full panel Varies by lab

For a household well, the usual route is the University of Georgia’s Agricultural and Environmental Services Laboratories. You pick up a kit at any county Extension office, drop the sample back, and UGA runs the test. Bacteria samples have to reach the lab within 24 hours of collection, so check the drop-off days before you sample. Radon needs a separate kit. Extension and the county health departments also run free or discounted testing days now and then, and several county environmental health offices test bacteria for a small fee.

EPD certifies drinking water labs for public water system monitoring, and the list of commercial labs is short. The EPD certified labs below handle the wider panel, and most will mail bottles anywhere in the state.

See all 12 certified labs in Georgia

Licensed water well contractors and certified pump contractors

Three things to know before you hire in Georgia:

  • Georgia licenses the person, not the company. Each profile shows the licensed drillers who work there. Licenses run through June 30, 2027.
  • Pump contractors are a separate license. A certified pump contractor may install and repair pumps but not drill. Their certificate numbers start with a P and run through June 30, 2028.
  • Ask about the county permit. If your county permits wells, your contractor should know the local rules. Call the county to be sure.

Every profile below is built from the EPD list of licensed water well contractors, grouped under the business the state record names. Certified pump contractors are listed separately.

See all 333 licensed contractors in Georgia

Georgia well water questions

Do I need a permit to drill a well in Georgia?

Not from the state. Some counties have their own well rules through the county environmental health office, which may include a permit and a bacteria test before the well is used, and the coastal counties in the Coastal Georgia Water Management Region have their own rules. Your licensed contractor will know, but call the county to be sure.

Is a water test required when I sell my house in Georgia?

No. Georgia has no statewide requirement, and the seller’s disclosure only says whether the property is on a well. Some lenders require a water test before closing.

How do I get my well tested cheaply?

Go to your county UGA Extension office. At the UGA lab, the basic water test (pH, hardness and about 20 minerals and metals) is $20, the expanded test is $60 and the bacteria test for coliform and E. coli is $40. Your county office may add a small handling fee, and the agent’s interpretation is included. Radon needs a separate kit.

How often should I test my well in Georgia?

Every year for coliform bacteria, as the Department of Public Health recommends, and every 3 years for a chemistry screen that includes arsenic and lead. Test uranium and radon at least once in the Piedmont and mountains, and arsenic at least once below the fall line. Retest after flooding, well work or a change in taste, color or smell.

How do I find the record for my well?

Georgia has no statewide well log database. The contractor is required to give the owner a well record at completion. If you don’t have one, ask the driller named on the pump or pressure tank, or the county environmental health office if the county permits wells.

Which lab should I use?

UGA through your Extension office for the routine tests, and an EPD certified commercial lab for VOCs, radon, PFAS or a lender’s full panel.