Alpine Analytical
Homeowner samples · Walk-in
- Arsenic
- Coliform Bacteria
- Full Homeowner Panel
- Hardness
- Iron and Manganese
- Lead
- Nitrate / Nitrite
- Uranium
Energy Laboratories – Helena is a commercial laboratory in Helena, MT (Lewis and Clark County). It is on the Montana and Colorado drinking water programs' list of certified laboratories, and we last checked the list on October 8, 2026.
The lab takes samples from homeowners.
Before you go: The Helena branch of Energy Laboratories holds DPHHS certification for microbiology and inorganic and organic chemistry, and also tests for iron and sulfur reducing bacteria.
Certified by the Colorado Department of Public Health and Environment (certification MT00945). Listed by CDPHE as accepting outside samples. Certified analytes: 1,2,4-Trichlorobenzene, 1,2-Dichloroethane, 1,2-Dichlorobenzene, Chloroform, Chlorobenzene, Total Xylenes, Tetrachloroethylene, Styrene, Carbon tetrachloride, Benzene, 1,4-Dichlorobenzene, 1,2-Dichloropropane, 1,1-Dichloroethylene, 1,1,1-Trichloroethane, Chlorodibromomethane, Bromodichloromethane, 1,1,2-Trichloroethane, c-1,2-Dichloroethylene, Bromoform, t-1,2-Dichloroethylene, Vinyl Chloride, Trichloroethylene, Toluene, Ethylbenzene, Dichloromethane.
This profile is built from the official state list of certified drinking water laboratories, checked on October 8, 2026. Well Water Insider does not rate or endorse labs. Run this lab? Claim the profile to add prices, turnaround times, hours and a description.
Listed on the official state certified laboratory list.
How this lab takes samples, based on its listing. Call to confirm hours, bottles and prices.
Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Prices at this lab may differ.
Bacteria samples need a sterile bottle from the lab. Chemistry samples usually take a clean container the lab supplies.
Skip softeners and filters. Remove the aerator, run the water 3 to 5 minutes, then fill without touching the inside of the cap.
Bacteria samples are time-sensitive. Use a cooler with ice packs and hand it in or ship it the same day.
Compare results with EPA drinking water limits. If anything is over, our problem pages explain what it means and how to treat it.
From the state certification list and the lab's own listing. Ask which ones it runs for homeowners.
Natural in some bedrock, with no taste or smell. The EPA limit is 0.010 mg/L. Learn more
Total coliform and E. coli. The test the CDC recommends every year for every private well. Learn more
A broad package that usually covers bacteria, nitrate, metals and minerals. Learn more
Calcium and magnesium. You need this number to size a water softener. Learn more
The cause of orange and black stains. EPA guidelines are 0.3 and 0.05 mg/L. Learn more
Usually from plumbing and older well parts. EPA says there is no safe level. Learn more
From fertilizer, manure and septic systems. The EPA limit is 10 mg/L as nitrogen. Learn more
Farm and lawn chemicals that can reach shallow wells.
Natural in granite and some other rock. The EPA limit is 0.030 mg/L. Learn more
Fuel and solvent chemicals from spills and leaking tanks. Learn more
3161 East Lyndale Avenue, Helena, MT 59601
Lab address
Yes. It is on the Montana and Colorado list of laboratories certified for drinking water testing, last checked October 8, 2026.
Its listing covers arsenic, coliform bacteria, full homeowner panel, hardness, iron and manganese, lead, nitrate / nitrite, pesticides, uranium and volatile organic compounds. Call to confirm prices and which tests it runs for private well owners.
Yes, the listing says it takes homeowner samples. Get the right bottle from the lab first, especially for bacteria.
Call (406) 442-0711 and visit the lab's website. The address is 3161 East Lyndale Avenue, Helena, MT 59601.
Homeowner samples · Walk-in
Homeowner samples · Mail-in kits · Walk-in